Loading... Please wait...

You Recently Viewed...

mAVR Micro DVR 12 Volt Adapter

  • Image 1
Calculated at checkout


The voltage converter for video camera (further referred to as the unit) is designed to be connected to mAVR1, mAVR2 or mAVR3 video recorders.

The unit is a voltage converter, which allows the video camera to be powered from the mAVR power source, and generates voltage of 12 V (200 mA) on its output. The output has a connector for the videocamera.

Besides, the unit includes an input connector which completely replicates the one on the videorecorder, and makes it possible to use an external microphone and remote control. Therefore, the user may have a stand-alone system to record video and audio without using any additional power supply units for the videocamera.


  • Peak load current: 200 mA
  • DC output voltage: 12V +/-10%
  • Input connector basing completely coincides with the same connector on the mAVR

The table contains the mAVR recording time figures with fully charged videorecorder battery (capacity of 1700mA*h) depending on the current consumption of a videocamera.

Camera Performance:

  • 1 Camera: Power Consumption - 50 mA / Recording time not less than 4 hours
  • 2 Cameras: Power Consumption - 100 mA / Recording time not less than 2.5 hours
  • 3 Cameras: Power Consumption - 150 mA / Recording time not less than 1.8 hours
  • 4 Cameras: Power Consumption - 200 mA / Recording time not less than 1.5 hours


  • Voltage converter for videocamera
  • Operation manual


It is necessary to keep in mind, that during start of the record by external button "Start" (for example, using the "external microphone + remote control unit" of our production) converter begins working at the moment of closing the button and stop working at the moment of its disconnection. In this case converter doesn't control the degree of discharge of the rechargeable battery in no way and if do not disconnect the external button "Start", than rechargeable battery will be discharged to the extremely low voltage.

As a result while using of an external button "Start" during the record it is necessary to watch the indication on mAVR. At the time of reduction of the voltage of the rechargeable battery lower than 3,3V the mAVR will automatically end the record, turn to the Stand-by mode and blink with red LED. When this indication appears it is necessary to disconnect the external button "Start". If it isn't be done, then rechargeable battery will be discharged practically to zero for 1,5... 2 hours and it can fall out.

Model: T-ARCF-PC - mAVR Micro DVR 12 Volt Adapter

Warranty Information

EyeSpyPro guarantees this product for 90 days from date of purchase. If the manufacturer offers a longer warranty, we will assist you in obtaining repairs under warranty. Contact us for the manufacturers warranty for this product.

Click For EyeSpyPro on Facebook Click For EyeSpyPro on YouTube Click For EyeSpyPro on Google+ Click For EyeSpyPro on Pinterest Click For EyeSpyPro on LinkedIn Click For EyeSpyPro on Vimeo Click For EyeSpyPro on Twitter Click For EyeSpyPro on Stumble Upon Click For EyeSpyPro on Ezinearticles.com

EyeSpyPro.com 101 S. Coit Rd., Suite 36-235, Richardson, TX 75080 USA
Phone: 1-949-791-7904 - FAX: 1-800-862-6120

All clients who purchase from this website agree to all terms and conditions in our Shipping, Returns/Cancellations, Payments, and Warranty links above.

With thousands of products, and dozens of suppliers, there is no guarantee your product will be in stock when you order it, so if its critical you need it right away, please call us @ 1-949-791-7904 before you make your order to confirm it is available and not out of stock or backordered.

Make sure you call us if you have any questions about selecting the correct product to fit your needs before you order, as any custom built hidden cameras, open software or fluid detection devices, boxes with the seal broken, vehicle trackers, and bug detectors are not refundable or returnable unless defective. We are here to assist you, and if you have ANY questions, please call us before you order @ 1-949-791-7904.

30 Day Satisfaction Guarantee: If for any reason you are unhappy with your purchase, you may return it for an exchange or a credit towards any other product within 30 Days,
no questions asked. In order to provide you with high quality products, we do not issue any refunds unless the product arrives defective.

Not responsible for typographical or illustrative errors. Prices, specifications, and images are subject to change without notice.

EyeSpyPro is not responsible for any shipment that is seized by any Government Customs or Border Protection Agency. We are not responsible for any duties, import fees, taxes, VAT charges, or any other fee that you are charged to ship it to you.

Any camera that is not advertised as a day/night, low light, or low lux camera will not perform well in low light, and not at all in the dark. Make sure you know what you are ordering before you order it, and feel free to call us @ the number above or send us an email using the Contact link above.

Do not buy any infrared illuminator if your camera is not an IR camera. It has to have a removable IR-Cut filter that slides out of the way at night for the camera to recognize the IR.

Shipping prices are for one small item. If you order more than one small item, including complete systems, we will adjust the order and charge the actual shipping price.

EyeSpyPro.com does not endorse any of our products for illegal activities. EyeSpyPro.com is not responsible or liable in any way for any damage, vandalism, theft, or any other action that may occur while a EyeSpyPro.com product is in use by the purchaser.