Loading... Please wait...

You Recently Viewed...

Veracity Powerstar Ethernet and PoE Over Coax Converter

  • Image 1
  • Image 2
Price:
$499.95
SKU:
A-FV-VHWHWPB/FV-VHWHWPC
Brand:
Shipping:
Calculated at checkout
Bracket:
Quantity:


Description

The Veracity Powerstar Ethernet and PoE Over Coax Converter allows you to run Network cameras over Legacy Coaxial cable with no power supply required.


The Veracity Powerstar Ethernet and PoE Over Coax Converter lets you run 1 network camera over your coaxial cable, and power it with a PoE switch.

vereacity-ethernet-poe-over-coax-diagram-hwps.jpg

The HIGHWIRE PowerStar lets you install IP network cameras quick and easy, without the distractions, disruptions, and expense of installing new cable.

Support for your camera is assured, thanks to HIGHWIRE PowerStar's unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years.

The Veracity Powerstar Ethernet and PoE Over Coax Converter has PoE over Coax, which will send up to 25 watts of PoE power to the networ camera, eliminating the neet to install local power supplies.

Simply add power
With no configuration or measurement required, installation of HIGHWIRE PowerStar is as straightforward as plugging it in.

Two models are used, as shown in the diagram below.  The BASE unit receives PoE power and transmits it down the coax.  The CAMERA unit receives power from the coax and delivers up to full PoE Plus power to the IP camera.

If PoE is not available, or for an extra power boost at either end of the cable, just connect the optional power supply.

Installer friendly
For fast installation and guaranteed performance, HIGHWIRE PowerStar features Veracity's unique SafeView display.

SafeView provides an instant and easy-to-understand confirmation of network and power status right across the cable, with no need to access remote equipment to check connections.

Meanwhile, safe and compliant detection of PoE equipment and PoE over coax compatibility ensures correct operation, with no risk of damage to non-PoE or legacy analog equipment.

Reliability assured
Because the length and quality of installed coaxial cable is hard to predict or measure, it is important to have confidence that the cable you are upgrading has the capacity to deliver continuous, reliable power to the new IP camera.

However, thanks to HIGHWIRE PowerStar's ultra low-power design and efficient power delivery, even the lowest grade of cheap RG-59 will support a 10 watt IP camera at any range likely to be found in a legacy installation.  And once connected, the SafeView power display instantly reaffirms that the actual power available to the camera is sufficient.

For predictable network performance, HIGHWIRE's proven technology delivers full network bandwidth, right to the limits of range.  And secure screw-terminal DC connections, or the option of using a UPS-backed PoE source, provide the last link in assuring continuous power delivery.

This Complete Veracity Powerstar Ethernet and PoE Over Coax Converter Comes With:

  • 1x VHW-HWPS-B - HIGHWIRE PowerStarTM Base unit
  • 1x VHW-HWPS-C - HIGHWIRE PowerStarTM Camera unit

Add The Following Options

Veracity Highwire Quad Four Port Ethernet Over Coaxial Features:

Range

  • See table in datasheet or manual.  Examples, with full 100Base-T throughput:
  • 10 watts of PoE at 265m (880ft) of 22AWG CCS RG-59 from a Veracity power supply
  • 10 watts of PoE at 300m (1000ft) of 20AWG RG-59 from an 802.3af PoE switch
  • 20 watts of PoE+ at 300m (1000ft) of 20AWG RG-59 from an 802.3at PoE+ switch
  • 25 watts of PoE+ at 500m (1600ft) of 14AWG RG-11 from a Veracity power supply

Power

  • Unit power 1.5 watts max
  • BASE PoE in IEEE 802.3af or 802.3at, class 4 (25.5W max)
  • CAMERA PoE out IEEE 802.3af or 802.3at, any class (25.5W max)
  • DC power input 40-57 volts, 0.7 amps max, class 2 isolated, screw terminal

Network

  • 100Base-T full-duplex Ethernet with auto-negotiation
  • Patch or crossover cables auto-detected

Dimensions

  • 84 x 54 x 24mm (3.3 x 2.1 x 0.95in) / 102mm (4in) including connector
  • 100g (3.5oz)

Veracity Highwire Quad Security Applications:

Upgrading to IP
Delivering full network connectivity and standardised, centrally-sourced power without recabling, HIGHWIRE removes many of the barriers to upgrading systems from analog to digital.

New installations
With the familiarity of coaxial cable and the reliability and cost advantages of PoE, HIGHWIRE PowerStar is an effective choice for the installation of new IP video systems where cable runs may be very long or inaccessible.

Long range networking
Use HIGHWIRE as a cost-effective means to deploy network conenctions beyond 100 metres - for example a buried RG-11 cable can be used to deliver a
network connection between buildings 500 metres apart.

Elevators and mechanisms
Because coaxial cable will coil and bend properly, unlike Cat 5 cable, HIGHWIRE provides an ideal means to provide network access to elevator carriages, for VoIP, security, lift panel and other devices.

Anywhere there's coax!
HIGHWIRE has been deployed over all types of video cable, radar, TV antenna and satellite downlinks, armored steel cables, you name it.  50 ohm coax or cables of other impedance can normally be used without any modification to the unit.
Because coaxial cable will coil and bend properly, unlike Cat 5 cable, HIGHWIRE provides an ideal means to provide network access to elevator carriages, for VoIP, security, lift panel and other devices.

Download the brochure for the Veracity Highwire Powerstar Products.

Warranty Information

EyeSpyPro guarantees this product for 90 days from date of purchase. If the manufacturer offers a longer warranty, we will assist you in obtaining repairs under warranty. Contact us for the manufacturers warranty for this product.

Find Similar Products by Category




Click For EyeSpyPro on Facebook Click For EyeSpyPro on YouTube Click For EyeSpyPro on Google+ Click For EyeSpyPro on Pinterest Click For EyeSpyPro on LinkedIn Click For EyeSpyPro on Vimeo Click For EyeSpyPro on Twitter Click For EyeSpyPro on Stumble Upon Click For EyeSpyPro on Ezinearticles.com

EyeSpyPro.com 101 S. Coit Rd., Suite 36-235, Richardson, TX 75080 USA
Phone: 1-949-791-7904 - FAX: 1-800-862-6120

All clients who purchase from this website agree to all terms and conditions in our Shipping, Returns/Cancellations, Payments, and Warranty links above.

With thousands of products, and dozens of suppliers, there is no guarantee your product will be in stock when you order it, so if its critical you need it right away, please call us @ 1-949-791-7904 before you make your order to confirm it is available and not out of stock or backordered.

Make sure you call us if you have any questions about selecting the correct product to fit your needs before you order, as any custom built hidden cameras, open software or fluid detection devices, boxes with the seal broken, vehicle trackers, and bug detectors are not refundable or returnable unless defective. We are here to assist you, and if you have ANY questions, please call us before you order @ 1-949-791-7904.

30 Day Satisfaction Guarantee: If for any reason you are unhappy with your purchase, you may return it for an exchange or a credit towards any other product within 30 Days,
no questions asked. In order to provide you with high quality products, we do not issue any refunds unless the product arrives defective.

Not responsible for typographical or illustrative errors. Prices, specifications, and images are subject to change without notice.

EyeSpyPro is not responsible for any shipment that is seized by any Government Customs or Border Protection Agency. We are not responsible for any duties, import fees, taxes, VAT charges, or any other fee that you are charged to ship it to you.

Any camera that is not advertised as a day/night, low light, or low lux camera will not perform well in low light, and not at all in the dark. Make sure you know what you are ordering before you order it, and feel free to call us @ the number above or send us an email using the Contact link above.

Do not buy any infrared illuminator if your camera is not an IR camera. It has to have a removable IR-Cut filter that slides out of the way at night for the camera to recognize the IR.

Shipping prices are for one small item. If you order more than one small item, including complete systems, we will adjust the order and charge the actual shipping price.

EyeSpyPro.com does not endorse any of our products for illegal activities. EyeSpyPro.com is not responsible or liable in any way for any damage, vandalism, theft, or any other action that may occur while a EyeSpyPro.com product is in use by the purchaser.