Loading... Please wait...

You Recently Viewed...

Planet 24 Port 10/100Mbps PoE Web Smart Ethernet Switch

  • 24 Port 10/100Mbps PoE Web Smart Ethernet Switch
Price:
$329.95
SKU:
CC-FNSW-2400PS
Brand:
Shipping:
$20.00 (Fixed shipping cost)
Quantity:


Description

Planet 24 Port 10/100Mbps PoE Web Smart Ethernet Switch is a department or workgroup PoE with advanced switch management capabilities.

Planet 24 Port 10/100Mbps PoE Web Smart Ethernet Switch

With 24 10/100Mbps ports, the Planet FNSW-2400PS provides a cost-effective and high-performance solution for power users. With its 4.8 Gigabits per second, non-blocking switch fabric, this device can easily provide a local, high bandwidth Fast Ethernet network for your departmental backbone.

This Planet PoE 24 port switch provides up to 125Watts PoE budget, in-line power interface, the FNSW-2400PS helps the administrator to flexibly build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise.

For instance, 24 cameras or wireless APs can be installed around the corner in the company for surveillance or wireless roaming demands. Without the power-socket limitation, the FNSW-2400PS makes the installation of cameras and Wireless LAN AP more efficiently.

Overview:

Cost-effective Edge Network Connection Solution
To provide enhanced network management with cost saving benefit to customers, PLANET releases the new version of the FNSW-2400PS, the Layer 2 Web Smart Switch with PoE injector function. The FNSW-2400PS is equipped with 24 Fast Ethernet ports integrating with PoE injector function. With 125Watts PoE power budget, it provides a compact, affordable, safe and reliable power solution for small to medium enterprises.

IEEE 802.3af Power over Ethernet Support
The PoE in-line power following the IEEE 802.3af standard makes the FNSW-2400PS able to deliver power to 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. It optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP Surveillance cameras.With more efficient switching power supply, the efficiency of the FNSW-2400PS would be much better than four linear power adapters in a long run and bring customers the key benefit – energy saving.

Easy Cabling Installation
The Power over Ethernet technology enables the Ethernet wire to carry both data and power. With data and power over Ethernet from one unit, the FNSW-2400PS shall reduce cable installation and eliminate the need for extension cords or dedicated electrical outlets on the wall, ceiling or any unreachable place. In all, it lowers the installation costs and simplifies the deployment effort.

Friendly Web-Based Management
For efficient management, the FNSW-2400PS is equipped with remote Web interface. It can be programmed for advanced switch management functions such as port configuration, VLAN, Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, port trunk, QoS, bandwidth control, and MAC address / TCP & UDP filter. The FNSW-2400PS provides Port-Based / IEEE 802.1Q / MTU VLAN (port based / IEEE 802.1Q VLAN including overlapping). The VLAN groups allowed on the FNSW-2400PS will be maximally up to 24 for port based or up to 32 for IEEE 802.1Q VLAN groups. On the other hand, the MTU VLAN divides port 1 to port 24 as separate LAN group. Via supporting port trunking, the FNSW-2400PS allows the operation of a high-speed trunk combining multiple ports. The FNSW-2400PS also provides two groups of up to 4-Port 10/ 100Base-TX trunk support with up to 800Mbps bandwidth per trunk group.

Application:

Department / Workgroup PoE Switch
With 24 10/100Mbps ports, the FNSW-2400PS provides a cost-effective and high-performance solution for power users. With its 4.8 Gigabits per second, non-blocking switch fabric, this device can easily provide a local, high bandwidth Fast Ethernet network for your departmental backbone. Providing up to 125Watts PoE budget, in-line power interface, the FNSW-2400PS helps the administrator to flexibly build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 24 cameras or wireless APs can be installed around the corner in the company for surveillance or wireless roaming demands. Without the power-socket limitation, the FNSW-2400PS makes the installation of cameras and Wireless LAN AP more efficiently.

Key Features:

Physical Port

  • 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector
  • Reset button for system management


Power over Ethernet

  • Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
  • Up to 24 IEEE 802.3af devices powered
  • Supports PoE Power up to 15.4 Watts for each 802.3af PoE port
  • Auto detect powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m


Layer 2 Features

  • Auto-MDI / MDI-X detection on each RJ-45 port
  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE Frame Flow control (Full-Duplex)
  • Supports VLAN:
    • –IEEE 802.1Q Tag-Based VLAN
    • –Port-Based VLAN
    • –MTU VLAN (Multi-Tenant Unit VLAN)
  • Supports Link Aggregation
    • –up to 2 trunk groups
    • –up to 4 Fast Ethernet ports per trunk group
    • –IEEE 802.3ad LACP (Link Aggregation Control Protocol)
  • Supports Spanning Tree Protocol
    • –STP, IEEE 802.1D (Classic Spanning Tree Protocol)
    • –RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
    • –Loopback Detection
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port


Quality of Service

  • 2 priority queues on all switch ports
  • Traffic classification:
    • –Port-Based priority
    • –IEEE 802.1p based priority
    • –IP TOS / DSCP based priority
    • –TCP / UDP Port-Based QoS
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • In/Out rate limit control on each port
  • Broadcast Storm Control support


Multicast

  • Supports IGMP Snooping v1 and v2


Security

  • MAC address filter
  • TCP & UDP filter on each port
  • Management idle time security


Management

  • Remote Web interface for Switch management and setup
  • Supports SNMP v1
  • Supports DHCP Option 82 and DHCP Relay
  • Firmware upgrade through Web interface
  • Configuration upload / download through Web interface
  • Reset button for system reboot or reset to factory default

Specification:

Hardware Specification
Ports 24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
Switch Processing Scheme Store-and-Forward
Throughput (packet per second) 3.57Mpps@64Bytes
Switch Fabric 4.8Gbps
Address Table 8K entries
Share Data Buffer 1.75Mb embedded memory for packet buffers
Flow Control Back pressure for Half Duplex, IEEE 802.3x Pause Frame for Full Duplex
Dimension (W x D x H) 445 x 207 x 45 mm (1U height)
Weight 2.55kg
Power Requirement 100~240V AC, 50-60 Hz, 2A
Power Consumption / Dissipation Max.135 Watts / 460 BTU
Smart Function
System Configuration Web interface, SNMP v1
Port Configuration Port Speed Duplex mode selection
Port Disable / Enable
Bandwidth Control Yes
Broadcast Storm Control Yes
Port Statistics Display each port’s detail Ethernet traffic counter information
VLAN 24 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
Spanning Tree Protocol STP, IEEE 802.1D (Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Port Trunking 2 groups of 4-Port 10/ 100Base-TX trunk support, up to 800Mbps bandwidth per trunk group
Port Mirroring Port mirroring allows monitoring of the traffic across any port in real time
QoS Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
MAC Address / TCP & UDP Filter Yes
IGMP Snooping v1 / v2 Allows to Disable or Enable
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / PSE
PoE Power Supply Type Mid-Span
PoE Power output Per Port 48V DC, 350mA . Max. 15.4Watts
Power Pin Assignment 4/5(-), 7/8(+)
PoE Power Budget 125Watts
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet (15.4Watts)
IEEE 802.3x Full-Duplex flow control
IEEE 802.1Q VLAN
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
Environment
Temperature Operating: 0~50 Degree C
Storage: -10~70 Degree C
Humidity Operating: 5~95%
Storage: 5~95% (Non-condensing)

Quick Guide

Date Version Description Download
2012-03-02 1.0 Initial Release

User's Manual

Date Version Description Download
2012-03-02 1.1 Initial Release

EC Declaration

Date Version Description Download
2012-08-14 1.0 EC Declaration

 

Ordering Information
FNSW-2400PS 24-Port 10/100Mbps PoE Web Smart Ethernet Switch

 

 

Download the brochure for the Planet 24-Port 10/100Mbps PoE Web Smart Ethernet Switch.

Warranty Information

EyeSpyPro guarantees this product for 90 days from date of purchase. If the manufacturer offers a longer warranty, we will assist you in obtaining repairs under warranty. Contact us for the manufacturers warranty for this product.



Click For EyeSpyPro on Facebook Click For EyeSpyPro on YouTube Click For EyeSpyPro on Google+ Click For EyeSpyPro on Pinterest Click For EyeSpyPro on LinkedIn Click For EyeSpyPro on Vimeo Click For EyeSpyPro on Twitter Click For EyeSpyPro on Stumble Upon Click For EyeSpyPro on Ezinearticles.com

EyeSpyPro.com 101 S. Coit Rd., Suite 36-235, Richardson, TX 75080 USA
Phone: 1-949-791-7904 - FAX: 1-800-862-6120

All clients who purchase from this website agree to all terms and conditions in our Shipping, Returns/Cancellations, Payments, and Warranty links above.

With thousands of products, and dozens of suppliers, there is no guarantee your product will be in stock when you order it, so if its critical you need it right away, please call us @ 1-949-791-7904 before you make your order to confirm it is available and not out of stock or backordered.

Make sure you call us if you have any questions about selecting the correct product to fit your needs before you order, as any custom built hidden cameras, open software or fluid detection devices, boxes with the seal broken, vehicle trackers, and bug detectors are not refundable or returnable unless defective. We are here to assist you, and if you have ANY questions, please call us before you order @ 1-949-791-7904.

30 Day Satisfaction Guarantee: If for any reason you are unhappy with your purchase, you may return it for an exchange or a credit towards any other product within 30 Days,
no questions asked. In order to provide you with high quality products, we do not issue any refunds unless the product arrives defective.

Not responsible for typographical or illustrative errors. Prices, specifications, and images are subject to change without notice.

EyeSpyPro is not responsible for any shipment that is seized by any Government Customs or Border Protection Agency. We are not responsible for any duties, import fees, taxes, VAT charges, or any other fee that you are charged to ship it to you.

Any camera that is not advertised as a day/night, low light, or low lux camera will not perform well in low light, and not at all in the dark. Make sure you know what you are ordering before you order it, and feel free to call us @ the number above or send us an email using the Contact link above.

Do not buy any infrared illuminator if your camera is not an IR camera. It has to have a removable IR-Cut filter that slides out of the way at night for the camera to recognize the IR.

Shipping prices are for one small item. If you order more than one small item, including complete systems, we will adjust the order and charge the actual shipping price.

EyeSpyPro.com does not endorse any of our products for illegal activities. EyeSpyPro.com is not responsible or liable in any way for any damage, vandalism, theft, or any other action that may occur while a EyeSpyPro.com product is in use by the purchaser.