The Planet 24 Port 10/100/1000Mbps 802.3at PoE+ with 4 Shared SFP Managed Switch comes in two versions:
The WGSW-24040HP series is the latest generation of PLANET Managed Gigabit PoE Switches featuring PLANET intelligent PoE functions to improve the availability of critical business applications. The series provides IPv6/IPv4 management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000Base-T ports featuring 30-watt 802.3at PoE+ and 4 Gigabit SFP slots. With total power budget up to 220W and 440W for different kinds of PoE applications, the series provides quick, safe and cost-effective Power over Ethernet network solutions to security IP surveillance for small business and enterprises.
Centralized Power Management for Gigabit Ethernet PoE Networking
To fulfill the needs of higher power required PoE network applications with gigabit speed transmission, the WGSW-24040HP series features IEEE 802.3at power over Ethernet plus(PoE+) that combines up to 30 watts of power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to meet the demand of higher power consuming network PD (powered devices) such as IR, PTZ, Speed Dome cameras or even Box type IP cameras with built in fan and heater. Compliant with both 802.3at and 802.3af, the series allows more flexibility in power requirement for a variety of PDs.
Built-in Unique PoE Functions for Powered Devices Management
As a managed PoE Switch for surveillance, wireless and VoIP network, the WGSW-24040HP series features special PoE Management functions:
■ PD ALIVE Check
■ Schedule Power Recycle
■ SMTP/SNMP Trap Event Alert
■ PoE Schedule
Intelligent Powered Device Alive-Check
The WGSW-24040HP series can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSW-24040HP series will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.
Power Recycling Schedule
The WGSW-24040HP series allows each of the connected PoE IP cameras to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.
SMTP/SNMP Trap Event Alert
Though most NVR or camera management software offers SMTP email alert function, the WGSW-24040HPs further provides event alert function to help to diagnose the abnormal device owing to the breakdown of the network connection, loss of PoE power or the rebooting response by PD Alice Check process.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection, the WGSW-24040HP series can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save power and money.
Cost-effective IPv6 Managed Gigabit Switch Solution for SMB
Faced with the increasingly large number of IP cameras and Wireless APs being installed and deployed in all kinds of applications, more and more network equipment comes with IPv6 protocol for next generation networking. The WGSW-24040HP series supports both the original IPv4 network structure as well as the new IPv6 protocol. With easy and friendly management interfaces and plenty of management functions included, the WGSW-24040HP series is the best choice for SMB, and IP Surveillance and Wireless service providers to connect with IPv6 network.
For efficient management, the WGSW-24040HP managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WGSW-24040HP series offers an easy-to-use, platform independent management and configuration facility. The WGSW-24040HP series supports SNMP and it can be managed via any based on standard of SNMP v1 and v2 management software. For text-based management mode, the WGSW-24040HP can be accessed via Telnet and the console port. Moreover, the WGSW-24040HP series offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.
Robust Layer2 Features
The WGSW-24040HP series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, rapid spanning tree protocol, layer2 to layer4 QoS, bandwidth control and IGMP/MLD snooping. The WGSW-24040HP series provides 802.1Q tagged VLAN and the VLAN groups allowed will be maximally up to 255. The WGSW-24040HP not only allows the operation of a high-speed trunk combining multiple ports, but also supports connection fail-over.
The WGSW-24040HP series offers comprehensive layer2 to layer4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The WGSW-24040HP series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.
Flexible and Extendable Solution
The four mini-GBIC slots built in the WGSW-24040HP series support dual speed that 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (Multi-Mode fiber) up to above 10/20/30/40/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for IP PoE Camera and NVR System
The WGSW-24040HP series brings an ideal, secure surveillance system at a lower total cost. It provides 24 10/100/1000Mbps 802.3at PoE ports with 4-port Gigabit TP/SFP Combo interfaces, offering sufficient PoE power for a maximum of 24 IEEE 802.3af PoE IP cameras at the same time.
With 4-port Gigabit TP/SFP Combo interfaces, the WGSW-24040HP series supports connection to three 8-Channel NVR systems to receive stream from 20 cameras and also to backbone switch from an uplink port, and then access to control center. With its high performance switch architecture, the recorded video files from the 20 IEEE 802.3af PoE IP camera devices can be saved in the NVR systems, which can be controlled and monitored both in the local LAN and the remote site via Internet.
IP Office Department / Workgroup PoE Switch
As the business expands, the additional telephones required could be installed at less cost via the implementation of PoE IP telephony system than that of the traditional circuit wiring telephony system. The WGSW-24040HP series helps enterprises to efficiently create an integrated data, voice, and powered VoIP network. PLANET IEEE 802.3af compliant IP phones can be installed without any power cable because it can be powered via the standard Ethernet cable from the connected WGSW-24040HP series. With the WGSW-24040HP series, IP telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.
IP Office Backbone PoE Switch
Providing up to 24 PoE, in-line power interfaces or providing up to 20 PoE, in-line power interfaces and 4 gigabit TP/SFP combo interfaces, the WGSW-24040HP series can easily build a power centrally controlled IP phone system, IP camera system, or wireless AP group for the enterprises. For instance, IP cameras or wireless APs can be easily installed in the company for surveillance demands or building a wireless roaming environment in the office. Without the power socket limitation, the WGSW-24040HP series makes the deployment of IP cameras or wireless LAN AP easier and more efficient. The 4 gigabit TP/SFP combo interfaces in the WGSW-24040HP series also offers flexible Gigabit TP or fiber connection for uplink to public server groups.
Power over Ethernet
Layer 2 Features
Quality of Service
|Copper Ports||24 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports|
|10/100/1000Mbps / SFP Combo Interfaces||4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps Dual mode DDM, shared with Port-21 to Port-24|
|Console||1 x RS-232 DB9 serial port (115200, 8, N, 1)|
|Address Table||8K entries, automatic source address learning and ageing|
|Share Data Buffer||4 megabits|
|Flow Control||IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
|Jumbo Frame||9K bytes|
|Reset Button||< 5 sec: System reboot
> 5 sec: Factory Default
FAN1 (Green), FAN2 (Green), PWR (Green)
FAN1 (Green), FAN2 (Green), FAN3 (Green), PWR (Green)
PoE Ethernet Interfaces (Port 1 to Port 24):
LNK/ACT (10/100/1000Mbps, Green), PoE In-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000 (LNK/ACT, Green), 100 (LNK/ACT, Orange)
|Power Requirements||WGSW-24040HP: 100~240V AC, 50/60Hz, 4A
WGSW-24040HP4: 100~240V AC, 50/60Hz, 6A
|Power Consumption (Full Load)||WGSW-24040HP: 262 watts
WGSW-24040HP4: 482 watts
|ESD Protection||6KV DC|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at/802.3af Power over Ethernet/PSE|
|PoE Power Supply Type||End-Span|
|PoE Power Output||Per Port 56V DC, 590mA
Max. 30.8 watts
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Budget||WGSW-24040HP: 220 watts max.
WGSW-24040HP4: 440 watts max.
|PoE Ability||■ PD @ 7 watts
WGSW-24040HP: 24 units
WGSW-24040HP4: 24 units
■ PD @ 15.4 watts
WGSW-24040HP: 14 units
WGSW-24040HP4: 24 units
■ PD @ 30.8 watts
WGSW-24040HP: 7 units
WGSW-24040HP4: 14 units
|Layer2 Management Function|
|Basic Management Interfaces||Console, Telnet, Web Browser, SNMP v1, v2c|
|Secure Management Interfaces||SSH, SSL, SNMP v3|
|Port Configuration||Port disable/enable
Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable/enable
|Port Status||Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status|
|VLAN||802.1Q Tagged based VLAN, up to 255 VLAN groups
Private VLAN Edge (PVE)
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
|Link Aggregation||IEEE 802.3ad LACP/Static Trunk
Supports 10 groups of 16-Port trunk
|QoS||Traffic classification based, Strict priority and WRR
8-Level priority for switching
■ Port Number
■ 802.1p priority
■ 802.1Q VLAN tag
■ DSCP/TOS field in IP Packet
|IGMP Snooping||IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support
|MLD Snooping||MLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Querier mode support
|Access Control List||IP-based ACL / MAC-based ACL
Up to 256 entries
|Bandwidth Control||Per port bandwidth control
|SNMP MIBs||RFC-1213 MIB-II
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
IEEE 802.1X PAE
|Regulation Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3ab 1000Base-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1D Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
|ICA-2200||Full HD PoE Box IP Camera|
|ICA-2500||5 Mega-Pixel PoE Box IP Camera|
|ICA-3350V||3 Mega-Pixel Vari-Focal Bullet IR IP Camera|
|ICA-5350V||3 Mega-Pixel Vandal Proof IR IP Camera|
|ICA-HM101||2 Mega-Pixel PoE Cube IP Camera|
|ICA-HM126||H.264 Full HD Box IP Camera|
|ICA-HM127||3 Mega-Pixel H.264 Box IP Camera|
|ICA-HM131||H.264 Full-HD Fixed Dome IP Camera|
|ICA-HM132||H.264 2 Mega-Pixel 20M IR Vari-Focal Dome IP Camera|
|ICA-HM136||H.264 2 Mega-Pixel 20M IR Vandal Proof Dome IP Camera|
|ICA-HM312||2 Mega-Pixel 25M IR Outdoor Bullet PoE IP Camera|
|ICA-HM316||2 Mega-Pixel Outdoor IR PoE IP Camera|
|ICA-HM351||2 Mega-Pixel 35M IR Outdoor Box PoE IP Camera|
|ICA-HM620||2 Mega-Pixel PoE Plus Speed Dome Internet Camera|
|ICF-1700||Touch Screen Internet Multimedia Phone|
|MFB-Series Transceiver||100Base-FX SFP Transceiver|
|MGB-Series Transceiver||1000Base-SX/LX SFP Transceiver|
|POE-152S||IEEE 802.3af Power over Ethernet Splitter|
|POE-162S||IEEE 802.3at Gigabit High Power over Ethernet Splitter|
|POE-E101||IEEE 802.3af Power over Ethernet Extender|
|POE-E201||IEEE 802.3at Power over Gigabit Ethernet Extender|
|VIP-254PT||SIP PoE IP Phone|
|VIP-256PT||802.3af PoE SIP IP Phone|
|VIP-360PT||Enterprise PoE IP Phone|
|VIP-361PE||Professional PoE IP Phone (5-Line)|
|VIP-560PT||Professional PoE IP Phone|
|WNAP-1120PE||802.11n Wireless Access Point with PoE|
|WNAP-6350||2.4GHz 300Mbps 802.11n Wireless Outdoor Access Point|
|WNAP-7350||5GHz 300Mbps 802.11a/n Wireless Outdoor Access Point|
|WNAP-C3220||300Mbps 802.11n Wireless Ceiling Mount Range Extender|
|WGSW-24040HP||24-Port 10/100/1000Mbps 802.3at PoE+ with 4 shared SFP Managed Switch|
|WGSW-24040HP4||24-Port 10/100/1000Mbps 802.3at PoE+ with 4 shared SFP Managed Switch (440Watts)|
EyeSpyPro.com 101 S. Coit Rd., Suite 36-235, Richardson, TX 75080 USA
Phone: 1-949-791-7904 - FAX: 1-800-862-6120
All clients who purchase from this website agree to all terms and conditions in our Shipping, Returns/Cancellations, Payments, and Warranty links above.
With thousands of products, and dozens of suppliers, there is no guarantee your product will be in stock when you order it, so if its critical you need it right away, please call us @ 1-949-791-7904 before you make your order to confirm it is available and not out of stock or backordered.
Make sure you call us if you have any questions about selecting the correct product to fit your needs before you order, as any custom built hidden cameras, open software or fluid detection devices, boxes with the seal broken, vehicle trackers, and bug detectors are not refundable or returnable unless defective. We are here to assist you, and if you have ANY questions, please call us before you order @ 1-949-791-7904.
30 Day Satisfaction Guarantee: If for any reason you are unhappy with your purchase, you may return it for an exchange or a credit towards any other product within 30 Days,
no questions asked. In order to provide you with high quality products, we do not issue any refunds unless the product arrives defective.
Not responsible for typographical or illustrative errors. Prices, specifications, and images are subject to change without notice.
EyeSpyPro is not responsible for any shipment that is seized by any Government Customs or Border Protection Agency. We are not responsible for any duties, import fees, taxes, VAT charges, or any other fee that you are charged to ship it to you.
Any camera that is not advertised as a day/night, low light, or low lux camera will not perform well in low light, and not at all in the dark. Make sure you know what you are ordering before you order it, and feel free to call us @ the number above or send us an email using the Contact link above.
Do not buy any infrared illuminator if your camera is not an IR camera. It has to have a removable IR-Cut filter that slides out of the way at night for the camera to recognize the IR.
Shipping prices are for one small item. If you order more than one small item, including complete systems, we will adjust the order and charge the actual shipping price.
EyeSpyPro.com does not endorse any of our products for illegal activities. EyeSpyPro.com is not responsible or liable in any way for any damage, vandalism, theft, or any other action that may occur while a EyeSpyPro.com product is in use by the purchaser.