FREE Insider Tips From The Surveillance Experts!

The SmarterFence technology uses fiber optic sensor cables to transmit a laser beam to detect a wide range of vibrations, flexing, compression, and cutting of the fence to notify you when intruders breach your perimeter.

The SmarterFence technology does not give off any electrical interference, so it's a perfect way to monitor hazardous industrial or chemical installations without the risk of fire.

The SmarterFence processor analyzes the sensor cable with a microcontrolled digital signal processor. You can set up pre-set conditions, and when they are exceeded, you will be notified of a breach. It uses automatic environmental compensation algorithms to reduce false alarms, and insure the highest probability of detecting intruders.

The SmarterFence technology is easy to install or repair should it become damaged.

Please call us for a quote for your facility: 1-877-339-3779, or send an email with the Contact Us form above, or FAX your requirements and a drawing of the application if possible to: 360-234-1441.

Specificatons:

• Processor
• High-performance microcontroller with integral digital signal processor (DSP) and Analog-to-Digital (A/D) converter.
• Sensor Cable and Connections
• The processor is designed for use with SmarterFence sensor cables.
• Method of Detection
• Laser diode transmitter with optical interference pattern detection using photo diode receiver.
• Power Requirement 
• 11.0 - 14.0 V DC @ 300 mA
• Alarm Output Relay
• Up to 1A @ 12 V DC
• Ancillary Outputs (Open Collector) 
• Two open-collector outputs with a maximum rating of 100 mA @ 24 V DC
• Status / Digital Inputs
• Three tamper-protected status inputs are available which may be derived from switches or relay contacts, open collectors or CMOS / TTL level digital signal.  The digital signal inputs provide the means by which external equipment may control the unit’s auto-threshold values.
• Serial Communications Ports 
• One isolated RS232 / RS485 serial port for alarm transmission, remote set- up or diagnostics.  One non-isolated RS232 serial port for local high-level
• Installation, Test and Diagnostic Aids
• The SmarterFence Processor Module incorporates a simple user interface comprising toggle switch, pushbutton and 3 seven-segment displays and allows all necessary settings to be easily configured without the need for specialist test equipment.  A number of operation and diagnostic LED indicators are also included to facilitate test and commissioning.  An audio monitor output is also available which may be used as an additional commissioning aid.
• An optional PC-based software package is available to enable local or remote, high-level test, set-up and diagnostics.
• Connections
• Electrical connections to the processor module are made via quick disconnect screw terminals.  Serial communications is via a PCB-mounted
• RJ45 connector.
• Environmental Specification 
• Operating Temperature Range: 14° F to 158° F
• Operating Humidity: Up to 95% at 104° F non-condensing
• Storage Temperature Range: -40° F to 158° F
• Electromagnetic Compatibility (EMC) 
• SmarterFence meets the requirements of EN55022:1998 and Low Voltage Directive 93/68/EEC.
• Dimensions 
• Printed Circuit Board: 6.22 inches x 4.37 inches. (158 mm x 111 mm)

Download the data sheet for the SmarterFence

Model: SM-SmartFence - SmarterFence Fiber Optic Fence Sensor Technology