FREE Insider Tips From The Surveillance Experts!

1. Turn the CamBall on by pressing center button 2 seconds after charging for 3 hours. It will flash 2x and the LEDs of MEM,  BAT, O/W are supposed to be Green.
2. Adjust the P/S button to Red (Right Arrow)
   
3. Adjust the  R/T button to Red (Left Arrow)
   
4. Adjust the REC button to Green/Red (Top Arrow)

Choose one depending upon your purpose of using Camball.

2. R/T LED: GREEN (Security Recording Type)

3. REC LED: GREEN/RED (Video + Audio Recording)

Please note that when you set P/S LED GREEN, your Camball doesn’t go to sleep because it is programmed to normally(continuously) record sound (whether or not there is any noise) even though there is no motion detected. At this GREEN setting, actually you can save memory capacity, but not power.

And when you set P/S LED RED, your Camball scans for motion every two seconds and , if there is a motion detected, it records for two minutes. If there is a continious motion, your Camball doesn’t go to sleep. However when no motion is detected by scanning, your Camball is actually sleeping.

At this RED setting, you can save both memory capacity and power. Please remember, though, that you cannot record audio when no motion is detected, because your Camball goes to sleep then.

What happens if you set REC LED RED? Your Camball is set to record only video, no audio. It means that there is no difference between your setting of P/S LED at RED and at GREEN. That means your Camball may not be able to meet your needs.

What happens if you set REC LED GREEN? Actually no motion detection function. Camball works like a voice recorder. That’s why we recommend you to set REC LED RED/GREEN for motion detection recording.